Place order through your dealer
Place order through your dealer
Fluoride-Releasing, Automix Dental Composite Core Build-up Material
SyringeMix STACK: Dual-Cure/Automix
3001512 Shade White
3001513 Shade A3
3001514 Shade Blue
Contains
2 – 9g automix syringes, 15 – mix-tips, 15 – standard intraoral tips, 10 – extra-fine intraoral tips
Cartridge Refills
3001432 Shade White
3001433 Shade A3
Contains
1 – 50g cartridge, 25 – mix-tips, 25 – intraoral tips
Accessories
3001418 SyringeMix Mix-Tips & Intraoral Tips (35)
3001468 SyringeMix Extra-Fine Intraoral Tips (50)
3001417 Cartridge Mix-Tips & Intraoral Tips (35)
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
- Clean and dry prepared tooth surface.
- Apply 37% phosphoric acid to the cavosurface for 10 to 15 seconds.
- Rinse and dry cavo surface, do not desiccate the tooth.
- Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application. - Light-cure for 20 seconds
Core Build-Up
- Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
- Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
- Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
- Check for complete hardness. The preparation can be finished immediately with a Two Striper® bur. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.
